Contact Us

Use the form on the right to contact us.

We are very quick to respond during business hours, so if you don't hear from us please call because we may not have gotten your message.


Duluth, MN

218-940-3095

KB Designs, LLC is a premier decorative painting and plastering firm in Minnesota.  Faux finishes for walls, Italian and Venetian plasters, countertop overlay, cabinet refinishing, decorative floors. Residential, Commercial, Hospitality.  Duluth, Minneapolis, Minnesota Nationwide 

Blog

Random blog posts from KB Designs, decorative painter, event planner, popsicle lover and maybe more.

 

Cabinet Refinishing and Painting

Kathy Boyd

We love breathing new life into your kitchen cabinets whether they are painted, stained or we give them a custom finish.  You can save thousands of dollars by having your existing cabinets refinished, so don't replace them!

Here are some of the most frequently asked questions.

Will the wood grain show through?

It can depending on the type of wood.  We do have products that can mask the grain fairly well if this is a concern.

Where are the cabinet doors refinished and do you remove the cabinet doors to paint them?

Depending on space, whether it is determined that the cabinets are hand or spray painted, the work could be done on site or in our studio.

We do not take responsibility for removing or hanging the cabinets doors.  If you are not able to do so yourself, we can recommend a handyman to do this for you.  All doors and drawers should be numbered so they are put back in their proper space.

What materials do you use?

We use only the highest quality products available.  They are more expensive then some of the typical products you find in your local hardware store, but they are of much better quality.

How much does it cost?

You can figure an average of $75 per door or opening.  The price can go up depending on the type of finish, and size of cabinet doors and/or opening.

Does the estimate include the materials?

Yes

Do the products smell?

Most are low in VOC and have minimal to no odor.

What is your process?

Depends on the chosen finish, but they all get the same preparation.  Cleaned and scrubbed down, sanded, scrubbed again to get off any residue, typically two layers of a high quality primer sanded between coats, the base coat in two coats, any glaze or embellishments, and two coats of a high quality topcoat and sealer.